你好,欢迎来到GLUBET格鲁电竞_格鲁电竞预测_格鲁电竞赔率!

区分有刷电机和无刷电机,解决油泵问题

   发布于:2020-02-12 10:43

GLUBET格鲁电竞_格鲁电竞预测_格鲁电竞赔率 客户在购买发电机组的时候总是会问为什么刷电机和无刷电机的区别如此之大。今天我们就来讲讲燃气发电机组有刷

  客户在购买发电机组的时候总是会问为什么刷电机和无刷电机的区别如此之大。今天我们就来讲讲燃气发电机组有刷电机和无刷电机的区别。

  Customers always ask why there is such a big difference between the brush motor and the non brush motor when purchasing the generator set. Today we will talk about the difference between the brush motor and the non brush motor of the gas generator set.

  从电机刷的名称可以看出,它有一个碳刷,碳刷的主要作用是通过滑环向转子绕组外供电,与转子联在一起。其不足之处在于碳刷与滑环之间经常发生摩擦和磨损,从而保护了碳刷与滑环的保养,否则会造成不好的接触、发电及发电不稳定等问题。所以碳刷的特点是成本低,技能含量低,技能过时,使用一段时间后,很容易有各种发电机组不发电等。无刷电机消除了碳刷和滑环的干扰,使其电压稳定,选用AVR有源调压器,电源质量优良,可靠性高,保护相对简单,这些优点使无刷电机应用更加广泛,已成为市场上的主流电机。

燃气发电机组

  As can be seen from the name of the motor brush, it has a carbon brush. The main function of the carbon brush is to supply power outside the rotor winding through the slip ring and connect with the rotor. The disadvantage is that friction and wear often occur between the carbon brush and the slip ring, so as to protect the maintenance of the carbon brush and the slip ring. Otherwise, it will cause bad contact, power generation and power generation instability. Therefore, the characteristics of carbon brush are low cost, low skill content and outdated skills. After using for a period of time, it is easy to have a variety of generator sets not to generate electricity. The BLDCM eliminates the interference of carbon brush and slip ring, makes its voltage stable, selects AVR active voltage regulator, has excellent power quality, high reliability and relatively simple protection, which makes the BLDCM more widely used and has become the mainstream motor in the market.

  油泵不工作的主要原因如下

  The main reasons for the pump not working are as follows1. 油泵总成或换向不良;

  1. Poor oil pump assembly or reversing;

  2. 油泵壳体不紧,进入空气中;

  2. The oil pump housing is not tight and enters the air;3.排水管系统不紧,有漏水现象;

  3. The drainage system is not tight and there is water leakage;4. 吸入管路堵塞;

  4. The suction pipe is blocked;

  5. 油泵包装箱不紧;

  5. The packing box of oil pump is not tight;6. 滤油器堵塞或吸油止回阀故障;

  6. The oil filter is blocked or the oil suction check valve is faulty;7. 油箱里的油太少了。

  There is too little oil in the tank.

  清洗方法:

  Cleaning method:

  1. 检查油泵是否维修;

  1. Check whether the oil pump is maintained;2. 清理、修理油滤器、吸油阀、吸油管道;

  2. Clean and repair the oil filter, oil suction valve and oil suction pipe;3.消除气密性,防止漏气;

  3. Eliminate air tightness and prevent air leakage;4. 通过充油排出吸入管和油泵内的空气;

  4. Discharge the air in the suction pipe and oil pump through oil filling;5. 在油箱里保持一定的油量。

  5. Maintain a certain amount of oil in the tank.

  以上是燃气发电机组厂家为大家介绍的相关内容,想要了解更多内容,欢迎访问网站: above is the relevant content introduced by the gas generator unit manufacturer. For more information, please visit the website:

上一篇:沼气燃烧过程中的有害物质有哪些?
下一篇:瓦斯发电机组如果遇到高温作业怎么办?